أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
The anilox roller is engraved with cells that meter and transfer the inks. The finer the
screen (cells per inch) and the shallower the etch, the less ink that will be transferred.
For example, a360 screen would deliver a much finer layer and lesser quantity of ink
and solvents than would a200 screen. A similar screen but lower volume will
effectively reduce the amount of ink transferred.Water-based inks have higher pigment
concentrations by volume that solvent-based inks. Therefore, less water-based ink
volume is required on the printing plate. Anilox roll cells should be adjusted
accordingly. The net result is less ink volume used.
In water based Ink - We get quality printing but for further processes it will scuffed need to another coating to keep printed area safe or if we used deep color to print the job run machine slow with short hight pile delivery in printing unit and here anti setoff powder compulsory to be used in end.
In solvent based - We get less printability but we have a surity in that process it will fast dry through IR lamps than water base with the help of oxidization here we also
Solvent base Ink will be better for coated paper.
Solvent base Ink will be much better for coated paper compare to water base. This might result into poor quality of print out.
Solvent base ink is better than water base ink for printing on coated paper. Because the surface tension of water is higher than the surface tension of organic solvent.
I will say water base is best.. because of lack of abration resistance for solvent base inks
Compatibility based on my experince
Coated Paper-Solvent, sublimation, and pigment ink.
Non-Coated Paper- Dye sublimation ink, UV dye ink
hi,
water base ink is better for coated paper
