What is SCSI (small computer system interface) technology?

Dear SCSI is a set of standards for physically connecting and transferring data between computers and peripheral devices.
The SCSI standards define commands, protocols and electrical and optical interfaces.
SCSI is most commonly used for hard disks and tape drives, but it can connect a wide range of other devices, including scanners and CD drives, although not all controllers can handle all devices.
The SCSI standard defines command sets for specific peripheral device types; the presence of "unknown" as one of these types means that in theory it can be used as an interface to almost any device, but the standard is highly pragmatic and addressed toward commercial requirements.
SCSI is an intelligent, peripheral, buffered, peer to peer interface.
It hides the complexity of physical format.
Every device attaches to the SCSI bus in a similar manner.
Up to8 or16 devices can be attached to a single bus.
There can be any number of hosts and peripheral devices but there should be at least one host.
SCSI uses handshake signals between devices, SCSI-1, SCSI-2 have the option of parity error checking.
Starting with SCSI-U160 (part of SCSI-3) all commands and data are error checked by a CRC32 checksum.
The SCSI protocol defines communication from host to host, host to a peripheral device, peripheral device to a peripheral device.
However most peripheral devices are exclusively SCSI targets, incapable of acting as SCSI initiators—unable to initiate SCSI transactions themselves.
Therefore peripheral-to-peripheral communications are uncommon, but possible in most SCSI applications.
The Symbios Logic53C810 chip is an example of a PCI host interface that can act as a SCSI target.
Regards.