Why knowing the superheat and subcooling are very useful in HVAC or AC system?

Question

Ideal superheat and subcooling affects the operational performance of AC /Chiller units.

Fikry Abdul Wahid · Answer

The purpose is to know the enthalphy for each process i.e in condenser, compressor and evaporator. By knowing this, you can choose a suitable design for the three components.

Jawwad Shah Shah · Answer

The right anwer because we prefer AC system, because easily convert into DC.

Ahmed Gahlan · Answer

Super heat and sub cooling are related to refrigeration status, both have impact on performance of refrigeration cycle, and on the Qadd in the evaporator and Qrej from the condenser, the more sub cooled/super heated the water entering and leaving evaporator the more Qadd in the evaporator which maximize the performance and efficiency but on the other hand it also maximize the Qrej required to be removed in the condenser and thus maximize the condenser size and related fans or pumping power

ANAS AHMED MUSTHAFA · Answer

HVAC IS Better than AC .and HVAC is not affect human body but AC some people affect in skin allergy.

Muhammad Siddique · Answer

Measuring superheat and sub cooling will tell us about the HVAC system performance  and also we can find where is the gas in evaporator or in condenser side.

GAUTAM MODI · Answer

Due to following reasons, AC systems are preferred over DC systems: a. It is easy to maintain and change the voltage of AC electricity for transmission and distribution. Plant cost for AC transmission (circuit breakers, transformers etc) is much lower than the equivalent DC transmission c.

RISHAD CH · Answer

AC is more safe than DC because the current is moving 60 times per second

Ismael Hamad · Answer

superheat and subcooling it's very useful in HVAC or AC system to account the final temperature at the end of compression will depend on the working limits and the refrigerant. Taking these many factors into account, the refrigerating effect (A1 – D1 Evaporation) and the compressor energy (B1 – A1- Compression) may be read off directly in terms of enthalpy of the fluid.

Oussama Halabi · Answer

To make proper sizing of compressor and condenser

jamal waziri · Answer

superheat and subcooling it's very useful in HVAC or AC system to account the final temperature at the end of compression will depend on the working limits and the refrigerant

Ahmed Tawfeek · Answer

ac property of raising/lowering voltage using transformers . and 3 phase cpabilities of transfering more power

خدمات بيت.كوم

استخدم تطبيق بيت.كوم

ابدأ بالتواصل مع الأشخاص وتبادل معارفك المهنية

Why knowing the superheat and subcooling are very useful in HVAC or AC system?

عمليات البحث الشائعة

المزيد من الأسئلة المماثلة