أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
very Comprehensive Answers.
I agree with answer Mr Mohamed and Alexs
..I agree with Mr. Mohamed Galal and Mr. Alex answers..Thank You
For elastomeric bearing to function as a soft spring, the bearing should be allowed for bulging laterally and the compression stiffness can be increased by limiting the amount of lateral bulging. To increase the compression stiffness of elastomeric bearings, metal plates are inserted.
After the addition of steel plates, the freedom to bulge is restricted and the deflection is reduced when compared with bearings without any steel plates under the same load. Tensile stresses are induced in these steel plates during their action in limiting the bulging of the elastomer. This in turn would limit the thickness of the steel plates.
In order to make a elastomeric bearing act/ function as a soft spring it should be made to allow it to bulge laterally and also the stiffness compression can be increased by simply increasing the limiting amount of the lateral bulging. In many cases in order to increase the compression stiffness of the bearing the usage of metal plates is made.
Once steel plates are included in the bearings the freedom of the bulge is restricted dramatically, also the deflection of the bearing is reduced as compared to a bearing without the presence of steel plates. The tensile stresses of the bearings are induced into the steel plates. But the presence of the metal plates does not affect the shear stiffness of the bearings.
the steal plates provided are to allow horizontal movement of the bridg. i.e, bridgs are designed as simply suported on either side of their suppot.
I agree with MR Mohamed Galal Hussain
steel platesb function is for sheer stressing when stiffines works
To add more friction between them
For structural balancing and alignment
THIS FOR ABSORPTION OR ADJUSTED THE LOAD PRESSURE AND VIBRATION