أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
If you say device for duct then i will say Sound liner which is installed inside the duct to reduce the sound of air inside the duct. Sound attenuators can be used when we have big fans or exhaust like generator. To minimize the open sound within that area and to reduce noise pressure sound attenuators are used.
Hope this will work.
In HVAC systems, the sound attenuator is best and has given good results. In a mechanical ventilation ventilation systems, once I built a separate soundproof partition around the exhaust blower by glas wool. That was reduce the internal sound level of the room about80%. But, that was transfer to the external environment. So, for applications like this it is always better to use silencers with internal baffles or attenuations.
Rigid fiber glass lining 25 mm thick are usually applied inside the duct to minimize the noise.
Acoustic Mineral Liners can be used to make a duct soundproof.
fiber glass acoustic or rubber inside the duct-or if the design was right in the first place will be no sound in the futre
