أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
check the product,parameter and settings,production date,
Before start operating machine read manuals operation to understand the axis function and their controls.use safety tools like google gloves and safety shoes.check the tools available and prepair it, then install the appropraite needs to make the product.make sure and follow the drawing before mass production.
Always make sure that " neck chains, finger rings, arm bands "are away from the chuck and work piece. Use the right tool for the right material at the proper speed. Use a proper cutting liquid for cooling, and lubrication.
Not familiar with the machine
first you have to check for the condition of the machine.then prepare the proper tools and tool bits that you will be using,check for the proper manual operation if there is any,use goggles to protect your eyes from chips.and then you can now proceed to operate the machine.
machine electroerosion ( exp:charmille;agema )
poste sodure lazer
bac ultrson
i have not operated this machine.
first of all check machine physically working and read manual then operate machine
Always wear protective eye protection. Handle heavy chucks with care. aware about the Emergency switch before starting. Setting cutting tool is important
TURNING OPERATION ON LATHEA work piece of a known diameter is clamp on the three jaw chucks used for holding the work piece usually at the spindle. A cutting tools that suits the operation is clamped on the tool post, the tool is then move to the workpiece via the carriage Handwheel after which it is feed using the cross slide till the desirable diameter is obtain. The measurement is check using venier Caliper.
i operate kind of machine is the lathe machines a lathe machine work ,tool that rotates the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation, facing, turning, with tools that are applied to the workpiece to create an object with symmetry about an axis of rotation.
