ابدأ بالتواصل مع الأشخاص وتبادل معارفك المهنية

أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.

متابعة

Why we are using circular pillars for the construction of bridges?

user-image
تم إضافة السؤال من قبل KRISHNAJAYANTH BEHARA , Asst.Engineer , Chandana Engineering Works
تاريخ النشر: 2016/12/10
Muhammad Azeem Abdul Waheed Bhatti
من قبل Muhammad Azeem Abdul Waheed Bhatti , Construction Project Manager , Al Wathba Building Contracting

Constant Inertia due to circular shape, Design, & Dynamic load transformation are the main reasons  

Sadeq Al-Abbad
من قبل Sadeq Al-Abbad , Service Specialist , Halliburton Energy Services Inc

l agree with all above answers

Tamer ElGhazouli
من قبل Tamer ElGhazouli , Technical Office Manager "Deputy Project Manager" , GAMA Construction

it gave a great architectural shape after construction , if its direct placed upon piles( mono piles) no need to bent or disturb pile reinforcement, if its in water ( river, sea, ) to reduce Water erosion effect on concrete

winston mathias
من قبل winston mathias , Construction Manager , Maxwell Kasim

Round Columns/Pillars are theoretically more stable and better for transferring loads to foundation, than square or rectangle cross-sectional columns.

Tamer Assaf
من قبل Tamer Assaf , Construction Division Manager , Wurth Gulf FZE

Usually the loads that are transferred to columns in bridges case are dynamic and moving due to traffic, the shape that has a constant inertia along all axes is the circle. This leads to a more economical design with a lower cross section to enhance the visibly through various angles around the pillar

subhash UPDA REGISTERED
من قبل subhash UPDA REGISTERED , TESTING AND COMMISSIONING ENGINEER , NEMCCO

Engineering is what not only provide necessary strength but also focus on economic design. thats why for economic projects circular pillar is used

hisham abu dagga
من قبل hisham abu dagga , Project Manager / مدير مشاريع , مؤسسة عبدالكريم العواض للمقاولات

 

Thank you for the invitation

 

Follow-up to the owners of experience in this specialty

mahmood kheder
من قبل mahmood kheder , مدير القسم الفني وحاصل على درجة الاستشاري من نقابة المهندسين , alliba

Thanks for your invitation

Although this is not my specialist, i read about it, the circular pillars of Bridges they make it, because you don't need to flush them to anything, also circular looks aesthetic there.

 

Mahmoud Zaher Tarakji
من قبل Mahmoud Zaher Tarakji , مدير , أوال جاليري

Is not a requirement to use the circular columns in bridges. ... Possible use of rectangular section columns .or in the form of T and decide to form by loads falling on the surface section of the column..

المزيد من الأسئلة المماثلة