ابدأ بالتواصل مع الأشخاص وتبادل معارفك المهنية

أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.

متابعة

What are the reasons for cracks in plastering works? What are the remedies? Does the thickness of plaster have any role with cracking?

user-image
تم إضافة السؤال من قبل SREEJITH KUNNATHULLY , Sr. Landscape Engineer , Arcadis
تاريخ النشر: 2016/12/25
Mohammed Mahmoud Khairy Ahmed Mostafa
من قبل Mohammed Mahmoud Khairy Ahmed Mostafa , Branch Manager, Structural Design Engineer , Ossiad Consultant Office

Some reasons of cracks are:

  • Non structural cracks as result of overtrowelling a rich mix.
  • Structural cracks caused by differential movement of the foundations, moisture expansion or drying shrinkage of masonry units, or thermal movement of the roof.
  • Debonding.
  • the hardness or strength of plaster. 

Of course the thickness of plaster may cause cracks.

 

Matt Manalac
من قبل Matt Manalac , Senior Site Engineer , WSP Middle Eas

The thickness of plaster may cause cracks, Poor workmanship and curing.

echo gumay
من قبل echo gumay , SR.DRILLING FOREMEN , SAUDI ARAMCO

the hardness or strength of plaster.

plastering is occur

crack in plaster

Mahmoud Hassan Ahmed Mohmed Khair
من قبل Mahmoud Hassan Ahmed Mohmed Khair , Planning Engineer , Dutch Star Construction

the most reason is the difference in the expansion factor

as the thickness of plaster rise the possibility of cracks to occur rise

Kamalakannan Rajendran
من قبل Kamalakannan Rajendran , Site Engineer , GHANTOOT TRANSPORT AND GENERAL CONTRACTING LLC

Structural damage also occurs as a house settles and moves in place or because of the expansion and contraction of the wooden lath holding the ceiling in place, due to moisture in the air. The final major causes of cracks in plaster ceilings are poor workmanship and improper curing of the plaster.

rahul pradeep
من قبل rahul pradeep , Site engineer , Living Space Interiors and Exteriors

Hardness and strenght pf plaster,debonding,drying shrinkage of mansory units

Dil Krishna Balaya Dev Bhakta Balaya
من قبل Dil Krishna Balaya Dev Bhakta Balaya , Land Surveyor , QCON,Salini impregilo,

stress of settling 

poor workmanship

because of exapnsion 

not proper curing

Gebremedhin Abraha
من قبل Gebremedhin Abraha , Project Manager , Grace Engineering

High silt content in sand (more than allowable) and lack of proper curing can also be causes of cracks in plaster.

 

Nelio Beleo
من قبل Nelio Beleo , Civil Inspector , Petrojet

Concretes, plasters are mainly the same in components and cracks are always there due to its mix proportions, poor workmanship and poor curing methods. Here are some remedies that would help to minimize cracks: 1) for thick plasters, put wire mesh (half inch opening) on the area to be plastered and fasten it with concrete nail. It will be its reinforcement. 2) The curing method: cover the plastered area with polyethylene sheets to retain moisture in longer time. Spray water regularly (5 to 6 times a day for 2 to 3 days). 

asif Iqbal
من قبل asif Iqbal , Site manager , Arial Construction & Industrial Company Ltd

mainly two reason for crack in plastering occur.  first is mixing of mortar means ratio of cement sand and water. another one is thickness of plaster.

المزيد من الأسئلة المماثلة