أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
Adding L3 switch device and different VLAN ranges to segregate data traffic.
If you want to reduce the number of broadcasts domains it is better to use a layer2 switches with a suitable IP scheme and if you need to reduce the size of your broadcast domain then u need at least one layer 3 device and layer 2 devices where you create the VLANs with a suitable IP scheme.
A router is added,L3 breaks broadcast domains.
By applying different vlan it will increase the broadcast domain number but it will decrease the size of broadcast
If u want to decrease the no of broadcast domain decrease the vlan
If u don't need the vlan network just use layer 2 or 3 switch there will be one broadcast domain.
Make Vlans in L2 Switch or Use Routers
Any layer 3 device would work, layer 3 switch or a router. VLANs configuration is a must.
layer 3 network device router or you can use layer 3switch
If we have switch network we can create VLAN's to divide network in logical groups therefore separating broadcasts in a network. Now as switch technology has evolved and routing function can also be performed those are known as layer 3 switches. So, we can implement L2 or L3 switch to implement VLAN's to decrease broadcast in a network.
Use a L3 Switch and create vlan to reduce the broadcast.
divide network into separated VLAN and we can use L3 switch iw we need to route between these vlans