أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
on cisco devices there are the debug commands that display the effects of commands as they executed.
as network monitoring tools think of open source tools as nagios.
monitor network traffic by using wireshark program
Hi,
I have had a great experience with working on one such tool called Netflow designed by Manage Net Engine. Cisco Routers have a compatibility with Different versions of Netflow v1, v5, v7, v9.
Its very simple to configure on the router and on the End point Desktop where you will be installing this software, you can have Customized Reports such as Top5 sources, Top5 destinations, TOP10 conversations, Bandiwdth Utilization Reports based on Interfaces and it can store data as long as you have IP accounting enebled on the Router INterfaces.
However its a Licensed Software with a trial version of30 days, i usually use it in the trial mode so as to anaylse the Network traffic over a period of15-20 days and if required, we can reinstall the software after the trial period is over.
Hope this helps!!!
Use a PC with wireshark installed and plug it into an RSPAN port switch.
wireshark can do it
Open source Network Monitoring tools and paid tools are available over the internet, however the great open source tools like prtg, mrtg and various tools available over the internet.
Refer the below link - http://www.dynacont.net/documentation/linux/network_monitoring/
NKS
use TMG ot ISA it monitor all the traffic on the network
open system task manager then select the tab networking
show the status of traffic
Good network monitoring tools are
Nagios
Wireshark
MS netwok Monitor
Cacti
For comparison of different network monitoring tools please visit following website
http://en.wikipedia.org/wiki/Comparison_of_network_monitoring_systems
