Config Static routing with example ?

Configuring a Static Route

You can configure a static route on the router.

SUMMARY STEPS

1. configure terminal

2. ip route {ip-prefix | ip-addr ip-mask} {[next-hop | nh-prefix] | [interface next-hop | nh-prefix]} [tagtag-value [pref]]

3. (Optional) show ip static-route

4. (Optional) copy running-config startup-config

DETAILED STEPS

Step 1 

configure terminal

Example:

switch# configure terminal

switch(config)#

Enters configuration mode.

Step 2 

ip route {ip-prefix | ip-addrip-mask} {[next-hop | nh-prefix] | [interface next-hop | nh-prefix]} [tag tag-value[pref]

Example:

switch(config)# ip route 192.0.2.0/8 ethernet 1/2192.0.2.4

Configures a static route and the interface for this static route. You can optionally configure the next-hop address. The preference value sets the administrative distance. The range is from 1 to 255. The default is 1.

Step 3 

show ip static-route

Example:

switch(config)# show ip static-route

(Optional) Displays information about static routes.

Step 4 

copy running-config startup-config

Example:

switch(config)# copy running-config startup-config

(Optional) Saves this configuration change.

This example shows how to configure a static route:

Use the no ip static-route command to remove the static route.