What are some tips for electrical safety?

As a Simple tips is normally in your incoming source of your electricity you should check if it is totally tight and no lost contact and must be use by recommended circuit breaker and make sure your all electrical materials use fore installation is standard .......

1.
DON'T plug a bunch of stuff into one outlet or extension cord.
It could damage the electrical system in your house or even cause a fire.2.
Make sure all electric cords are tucked away, neat and tidy.
Pets might chew on electrical cords, and people might trip and fall.3.
DON'T ever climb the fence around an electrical substation.
If a ball or pet gets inside the fence, ask a grown-up to call the electric company - they'll come and get it out for you.4.
DON'T yank an electrical cord from the wall.
Pulling on a cord can damage the appliance, the plug or the outlet.5.
Fly your kite far away from power lines or substations.
The kite and the string may conduct electricity - sending it right through you to the ground.6.
Ask a grown-up for help when you need to use something that uses electricity.7.
DO look up and look out for power lines before you climb a tree.
The electricity can go right through the tree branch - and right through you!8.
Have a grown-up put safety caps on all unused electrical outlets.
Covering outlets will also help save energy by stopping cold drafts.9.
Remind your mom or dad to watch out for power lines when they're using a ladder, chainsaw or other outdoor equipment.10.
Keep electrical stuff far away from water.
Most electrical accidents around the house happen when people use electricity near water.

1.Assume that all overhead wires are energized at lethal voltages.
Never assume that a wire is safe to touch even if it is down or appears to be insulated.2.Never operate electrical equipment while you are standing in water.3.Never operate electrical equipment while you are standing in water4.Stay at least10 feet (3 meters) away from overhead wires during cleanup and other activities.
If working at heights or handling long objects, survey the area before starting work for the presence of overhead wires.5.Have a qualified electrician inspect electrical equipment that has gotten wet before energizing it.