ابدأ بالتواصل مع الأشخاص وتبادل معارفك المهنية

أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.

متابعة

A simple question, but for the spread of information: What is the difference between 1. Transmission Line 2. Trunk Main Line 3. Distributions line

user-image
تم إضافة السؤال من قبل Mohammed Hamed , O&M Industrial wastewater Treatment Plant Superintendent , Marafiq Saur
تاريخ النشر: 2014/03/31
ponnuswami senthilkumar
من قبل ponnuswami senthilkumar , Inspection Engineer , APPULUS VELOSI OMAN LLC.

Trunk main line is used to transport oil from main plant to oil mooring facility

Transmission lines are coming from gathering stations to main plant.

Distribution line distribute oil to different locations

مستخدم محذوف‎
من قبل مستخدم محذوف‎

1. Transmission line: this for transport of oil & gas from gathering system to refining, processing or storage areas.

2. Trunk Mainline: are for transmission of product from production area to consumption area.

3. Distrution line: is an end to end flow of product from suppliers to consumer end.

masoud soltani
من قبل masoud soltani , Instructor/Professor , university

Transmission line means a pipeline, other than a gathering line, that: (a) Transports gas from a gathering line or storage facility to a. distribution center, storage facility, or large volume customer that is.

trunk maine line The main line of a communications or transportation system.

Distribution is the final step in delivering natural gas to customers.distribution network is a system of external pipelines from a source to a gas consumer service line as well as facilities and engineering devices for them

 

Choudhary Sikander Hayat
من قبل Choudhary Sikander Hayat , Assistant Resident Engineer , WSP

Transmission line suppling to some where 

Trunk Maine Line connecting bigger dia

Distribution Line distributing to small dia 

bhisham kumar hindu
من قبل bhisham kumar hindu , MECHANICAL FITTER , KUANTUM PAPERS LIMITED

Transmission Line:

For the purposes of analysis, an electrical transmission line can be modelled as a two-port network (also called a quadrupole network), as follows:

Transmission line4 port.svg

In the simplest case, the network is assumed to be linear (i.e. the complex voltage across either port is proportional to the complex current flowing into it when there are no reflections), and the two ports are assumed to be interchangeable. If the transmission line is uniform along its length, then its behaviour is largely described by a single parameter called the characteristic impedance, symbol Z0. This is the ratio of the complex voltage of a given wave to the complex current of the same wave at any point on the line. Typical values of Z0 are or ohms for a coaxial cable, about ohms for a twisted pair of wires, and about ohms for a common type of untwisted pair used in radio transmission.

Trunk Main Line: use for transmission of product from production area to consumption area.

Distributions Line:distribute to oil different locations.

المزيد من الأسئلة المماثلة

هل تحتاج لمساعدة في كتابة سيرة ذاتية تحتوي على الكلمات الدلالية التي يبحث عنها أصحاب العمل؟