Register now or log in to join your professional community.
One of the most important properties of concrete is its compressive strength. Testing for compressive strength helps determine whether a product meets specified strengthrequirements
Concrete is widely used as a primary structural material in construction due to numerous advantages, such as strength, durability, ease of fabrication, and noncombustibility properties, it possesses over other construction materials. Concrete structural members when used in buildings have to satisfy appropriate fire safety requirements specified in building codes [1–4]. This is because fire represents one of the most severe environmental conditions to which structures may be subjected; therefore, provision of appropriate fire safety measures for structural members is an important aspect of building design.
Fire safety measures to structural members are measured in terms of fire resistance which is the duration during which a structural member exhibits resistance with respect to structural integrity, stability, and temperature transmission [5, 6]. Concrete generally provides the best fire resistance properties of any building material [7]. This excellent fire resistance is due to concrete’s constituent materials (i.e., cement and aggregates) which, when chemically combined, form a material that is essentially inert and has low thermal conductivity, high heat capacity, and slower strength degradation with temperature. It is this slow rate of heat transfer and strength loss that enables concrete to act as an effective fire shield not only between adjacent spaces but also to protect itself from fire damage.
The behaviour of a concrete structural member exposed to fire is dependent, in part, on thermal, mechanical, and deformation properties of concrete of which the member is composed. Similar to other materials the thermophysical, mechanical, and deformation properties of concrete change substantially within the temperature range associated with building fires. These properties vary as a function of temperature and depend on the composition and characteristics of concrete. The strength of concrete has significant influence on its properties at both room and high temperatures. The properties of high strength concrete (HSC) vary differently with temperature than those of normal strength concrete (NSC). This variation is more pronounced for mechanical properties, which are affected by strength, moisture content, density, heating rate, amount of silica fume, and porosity.
In practice, fire resistance of structural members used to be evaluated mainly through standard fire tests [8]. In recent years, however, the use of numerical methods for the calculation of the fire resistance of structural members is gaining acceptance because these calculation methods are far less costly and time consuming [9]. When a structural member is subjected to a defined temperature-time exposure during a fire, this exposure will cause a predictable temperature distribution in the member. Increased temperatures cause deformations and property changes in the constitutive materials of a structural member. With knowledge of deformations and property changes, the usual methods of structural mechanics can be applied to predict the fire resistance performance of a structural member. The availability of material properties at an elevated temperature permits a mathematical approach for predicting fire resistance of structural members [10, 11].
Clearly, the generic information available on properties of concrete at room temperature is seldom applicable in fire resistance design [12]. It is imperative, therefore, that the fire safety practitioner knows how to extend, based on a priori considerations, the utility of the scanty property data that can be gathered from the technical literature. Also, knowledge of unique characteristics, such as fire induced spalling in concrete, is critical to determine the fire performance of concrete structural members.
The fire response of reinforced concrete (RC) members is influenced by the characteristics of constituent materials, namely, concrete and reinforcing steel. These include (a) thermal properties, (b) mechanical properties, (c) deformation properties, and (d) material specific characteristics such as spalling in concrete. The thermal properties determine the extent of heat transfer to the structural member, whereas the mechanical properties of constituent materials determine the extent of strength loss and stiffness deterioration of the member. The deformation properties, in conjunction with mechanical properties, determine the extent of deformations and strains in the structural member. In addition, fire induced spalling of concrete can play a significant role in the fire performance of RC members [13]. All these properties vary as a function of temperature and depend on the composition and characteristics of concrete as well as those of the reinforcing steel [12]. The temperature induced variation in properties in concrete is much more complex than that in reinforcing steel due to moisture migration as well as significant variation of ingredients in different types of concrete. Thus, the primary focus of this chapter is on the effect of temperature on properties of concrete. The effect of temperature on properties of steel reinforcement can be found elsewhere [4, 12].
Concrete is available in various forms and it is often grouped under different categories based on weight (as normal weight and light weight concrete), strength (as normal strength, high strength, and ultrahigh strength concrete), presence of fibers (as plain and fiber-reinforced concrete), and performance (as conventional and high performance concrete). Fire safety practitioners further subdivide normal-weight concretes into silicate (siliceous) and carbonate (limestone) aggregate concrete, according to the composition of the principal aggregate. Also, when a small amount of discontinuous fibers (steel or polypropylene) is added to a concrete batch mix to improve performance, this concrete is referred to as fiber-reinforced concrete (FRC). In this section, the various properties of concrete are mainly discussed for conventional concrete. The effect of strength, weight, and fibers on properties of concrete at elevated temperatures is highlighted.
Traditionally, the compressive strength of concrete used to be around 20 to 50 MPa, which is classified as normal-strength concrete (NSC). In recent years, concrete with a compressive strength in the range of 50 to 120 MPa has become widely available and is referred to as high-strength concrete (HSC). When compressive strength exceeds 120 MPa, it is often referred to as ultrahigh performance concrete (UHP). The strength of concrete degrades with temperature and the rate of strength degradation is highly influenced by the compressive strength of concrete.
Structural concrete
slump test
temperature test of fresshly concrete
compressive test for specimen sample
concrete has compressive strenth ,Characteristic Strength,Tensile strength,Durability,Grades M20 M25 M30 etc,creep,shrinkage,unit weight,modular ratio,poisson's ratio.
Concrete has relatively high compressive strength, but significantly lower tensile strength, and as such is usually reinforced with materials that are strong in tension (often steel). The elasticity of concrete is relatively constant at low stress levels but starts decreasing at higher stress levels as matrix cracking
