Start networking and exchanging professional insights

Register now or log in to join your professional community.

Follow

What is EIRP?how to find the fault in smps if i am not getting the output?

user-image
Question added by PAPPU MAJUMDER , Microsoft Business intelligence (MSBI) , Equifax
Date Posted: 2016/01/31

In radio communication systems, equivalent isotropically radiated power (EIRP) or, alternatively, effective isotropically radiated power[1] is the amount of power that a theoretical isotropic antenna (which evenly distributes power in all directions) would emit to produce the peak power density observed in the direction of maximum antenna gain. EIRP can take into account the losses in transmission line and connectors and includes the gain of the antenna. The EIRP is often stated in terms of decibels over a reference power emitted by an isotropic radiator with an equivalent signal strength. The EIRP allows comparisons between different emitters regardless of type, size or form. From the EIRP, and with knowledge of a real antenna's gain, it is possible to calculate real power and field strength values.

EIRP|_{log} = P_T - L_c + G_a

where \\scriptstyle EIRP and \\scriptstyle P_T (output power of transmitter) are in dBm, cable losses (\\scriptstyle L_c) is in dB, and antenna gain (\\scriptstyle G_a) is expressed in dBi, relative to a (theoretical) isotropic reference antenna.

This example uses dBm, although it is also common to see dBW.

Decibels are a convenient way to express the ratio between two quantities. dBm uses a reference of1 mW and dBW uses a reference of1 W.

\\text{dBm} = \\log \\left(\\frac{\\text{power out}}{1\\,\\mathrm{mW}} \\right)

and

\\text{dBW} = \\log \\left(\\frac{\\text{power out}}{1\\,\\mathrm{W}} \\right)

A transmission output of W is the same as dBW or dBm.

.\\,\\mathrm{dBW} = \\log \\left(\\frac{\\,\\mathrm{W}}{1\\,\\mathrm{W}} \\right)

The EIRP is used to estimate the service area of the transmitter, and to coordinate transmitters on the same frequency so that their coverage areas do not overlap.

In built-up areas, regulations may restrict the EIRP of a transmitter to prevent exposure of personnel to high powerelectromagnetic fields, however EIRP is normally restricted to minimise interference to services on similar frequencies.

The Arecibo Planetary Radar transmits up to1 MW ( dBW) of power with an antenna gain of about.3 dB at.6 cm wavelength, resulting in an EIRP of roughly dBW ( TW).

More Questions Like This