What are the differences between flocculant and coagulant?

Coagulation means to curdle; it basically refers to a chemical process in which the destabilization of non-settleable particles takes place. These particles form clumps with the help of a coagulant. On the other hand, flocculation means to form flocs.  It can be described as a physical or a mechanical process in which the coagulated clumps or flocs are joined together to form masses as a cloud and then a precipitate. 

In coagulation, the forces responsible for keeping the particles apart after they contact, are reduced. Flocculation brings the de-established colloidal particles together and they form large aggregates. Both these techniques are employed in the treatment of water. Thus, we can understand the process of coagulation and flocculation with the help of examples derived from water treatment techniques.

Water may contain colloidal solids like non-settleable organic matter, clay particles, bacteria, plankton, small particles of decayed plant material, etc. Thus, coagulation and flocculation techniques are employed for separating these impurities from water.

Coagulation is achieved by neutralizing the particles and thus, the repelling force between the particles is greatly reduced. After employing the flocculation process, the coagulated particles form a large agglomeration, which is also known as floc

Coagulation can be easily achieved with the help of a coagulant. In raw water, inorganic salts of aluminum or iron can be added, these salts neutralizes the charge on the particles that are responsible for the raw water turbidity. These salts also hydrolyze to form insoluble precipitates entrapping the particles. Some of the common inorganic coagulants are aluminum sulphate, alum, ferric sulfate and aluminum chloride.

In flocculation, these agglomerations of destabilized particles take the form of large particles. This can also be achieved by adding high molecular weight, water soluble organic polymers. Due to these polymers, the size of the floc increases and then the particles settle down. It is very important to gently mix the flocculating agent at a slow speed so that small flocs can easily agglomerate into large particles, and finally settle down.

For water treatment, coagulation is generally followed by flocculation.

Thus, in terms of water treatment, both can be differentiated easily. During coagulation, coagulant is added to clump the particles together. On the other hand, during flocculation, the solution is mixed gently, so that the small clumps formed during coagulation, gather together and form larger clumps. These large clumps easily settle down and thus can be separated.

coagulant is added to clump the particles together. On the other hand, during flocculation, the solution is mixed gently, so that the small clumps formed during coagulation, gather together and form larger clumps. These large clumps easily settle down and thus can be separated.

The process of coagulation, along with flocculation, is used whenever the natural settling rate of suspended material is too slow to provide effective clarification. Coagulants are used to neutralize the charge of the suspended solids, bringing the particles together to create a small “pin floc”.

 

 

Coagulation means to curdle; it basically refers to a chemical process in which the destabilization of non-settleable particles takes place. These particles form clumps with the help of a coagulant. On the other hand, flocculation means to form flocs.  It can be described as a physical or a mechanical process in which the coagulated clumps or flocs are joined together to form masses as a cloud and then a precipitate.