Register now or log in to join your professional community.
The water–cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix. A lower ratio leads to higher strength and durability of the concrete.
A low water to cement ratio is the number one issue effecting concrete quality.
Low water cement ratio impacts all of the desired properties of concrete listed in the desired property of concrete section.
Use a maximum 1:2 water to cement ratio when concrete is exposed to freezing and thawing in a moist condition or to deicing chemicals per the 1997 Uniform Building Code. (Table 19-A-2)
Use a maximum .45 (19/20) water to cement ratio for concrete with severe or very severe sulfate conditions per the 1997 Uniform Building Code (Table 19-A-4)
Water permeability increases exponentially when concrete has a water cement ratio greater than 1:2.
Durability increases the less permeable the concrete mix is.
Strength improves with lower water cement ratios. A .45 (19/20) water cement ratio most likely will hit 4500 psi (pounds per square inch) or greater. A 1:2 water cement ratio will likely reach 4000 psi or greater.
For complete Uniform Building Code information regarding concrete construction, review with your architect, your ready mix supplier, or at your local library.
The water to cement ratio is calculated by dividing the water in one cubic yard of the mix ( in pounds) by the cement in the mix (in pounds). So if one cubic yard of the mix has 235 pounds of water and 470 pounds of cement- the mix is a 1:2 water to cement ratio.
If the mix lists the water in gallons, multiply the gallons by 8.33 to find how many pounds there are in the mix.
