Start networking and exchanging professional insights

Register now or log in to join your professional community.

Follow

What is the most common drilling problems?

user-image
Question added by imad Alqutaiti , Health, Safety, IT and management , Army Force
Date Posted: 2017/09/13
alauddin habib
by alauddin habib , Directional Driller , Qui Handika

The most common drilling problems are :

1. pipe stuck.

2. lost circulation.

3. shallow gas

4. downhole pressure

5. H2S bearing zone

etc

Emman Castillo
by Emman Castillo , Process Engineer , Air Liquide

In well planning, the key to achieving objectives successfully is to design drilling programs on the basis of anticipation of potential hole problems rather than on caution and containment. Drilling problems can be very costly. The most prevalent drilling problems include:

Marco Antonio  Hernandez Ramirez
by Marco Antonio Hernandez Ramirez , Operations Coordinator

1. pipe stuck.

2. lost circulation.

3.Borehole inestability

 

israr  ulhaq
by israr ulhaq , Night Drilling Supervisor , MOL Pakistan

Hole Stability

Pipe stucking

Directional dogleg severity

H2S

Loss circulation

etc

Saadi Ahmad Jasim Al sheak eassa AL Salami
by Saadi Ahmad Jasim Al sheak eassa AL Salami , Senior Petroleum Engineer , شركة نفط الشمال

1- Pipe stucking.

2-Complete or partial lost circulation.

3-Natural gas kicking.

4-H2s hazards .

5-BAD casing cementing.

VENU DE GAZ   

coincement

h2s

Deleted user
by Deleted user

1. lost circulation

2. pipe stuck

3. Borehole instability

4. kicks

5. bit dogleging 

Mohammed Abdulwadood Mohammed Al-sanhani
by Mohammed Abdulwadood Mohammed Al-sanhani , Petroleum Engineer , SEP

Lost Circulation

Well Kick

Sticking Of Pipe

Deviating Of The Hole In DD

Caving Of The Well Wall

Uncontrol Of  Down Hole Pressure

Instability Of The Hole

The Mud To Be Contaminated

Thin Gas Permeable Zones

Damage Of  Formation

Bad Communication

 

 

Elhadi Bendifallah
by Elhadi Bendifallah , workover supervisor , Sinopec/Sonatrach

lost circulation, stuck pipe

Abdellahi Ahmed Salem
by Abdellahi Ahmed Salem , Sr Drilling engineer , Schlumberger Algeria – IPM/D&M

1. Stuck pipe

2. Circulation loss

3. Well control

4. Borehole stability

More Questions Like This