What are the important problems that should be avoided when installing the microwave and what are the anticipated problems and ways to solve it?

When i install microwave link

First i follow link budget

than the most importantly i check link for interference because that can harm other links. if there is interference, i contact planning team to give me new pair of channels, if new pair is not available than we change the polarity of ODU. 

Beside this problem, there is risk when working with power. best way to avoid that risk is to ask your best technician to work on power.

  The first factor is polarization when we used the vertical and horizontal polarization in the same transceiver we should used the xpic option to separate between the frequency to avoide interference

the second factor is the waveguide connection to the parabolic antenna especially when using space diversity

We should notice the polarization, i.e, If horizontal polarisation is required,We should set it as it.If it is set in Vertical,We will not get the link alignment.

The second thing is,When we go for commissioning, We shouls set the Modulation type and Frequency band. If it is wrong, we cannot get the correct signal level.