Inscrivez-vous ou connectez-vous pour rejoindre votre communauté professionnelle.
Our machine VF-6/50 is mounted on the table HRT310. We do a lot of processing four-and sometimes there are two different problems. It happens that the axes of parts and not unscrew the rotary table, which in turn results in an alarm. The second problem arises when we use CAD program: after each tool path he wants to go to A0, so it must unscrew the rotary table, which takes some time. Is there any way to save a little time in such cases?
There is one solution that will make both of these problems disappear. This function includes one setting (Quick Rotary G28) and one parameter (CIRC WRAP). Make sure that the setting 108 is ON and that the parameter 43 bit10 is set to 1 when you program G91 G28 A0. The rotary table is not unscrewed by more than one turn. So for the future, Haas rotary table can turn about 99999.999 degree.
I don't have any experience with this type of machines
The rotary table it used for cutting circular grooves, hole patterns, and angled cuts. It is used in cases where using the CNC is not applicable like when a piece is too large for the CNC.
