Communiquez avec les autres et partagez vos connaissances professionnelles

Inscrivez-vous ou connectez-vous pour rejoindre votre communauté professionnelle.

Suivre

What is the difference between back flow preventer and double check valve?

user-image
Question ajoutée par Abdullah Alkaf , Technical Mechanical Engineer , Rafic A Kreidie
Date de publication: 2013/06/26
Ismael Hamad
par Ismael Hamad , Trainer , ANTONOIL DMCC , Lukoil project, WQ2

 

A backflow prevention device is used to protect potable water es from contamination or pollution due to back flow. In water supply systems, water is normally maintained at a significant pressure to enable water to flow from the tap, shower etc. When pressure fails or is reduced, as may happen if a water main bursts, pipes freeze or there is unexpectedly high demand on the water system, then such reduced pressure in the pipe may allow contaminated water from the ground, from storage or from other sources to be drawn up into the system.

 

double check valve or double check assembly (DCA) is a backflow prevention device designed to protect water supplies from contamination. It is also a valve used in air brake systems on heavy trucks. It consists of two check valve assembled in series. This employs two operating principles: firstly one check valve will still act, even if the other is jammed wide open. Secondly the closure of one valve reduces the pressure differential across the other, allowing a more reliable seal and avoiding even minor leakage.

 

Abdulkadir Ahmed
par Abdulkadir Ahmed , Manager Life Safety Reports , Oakridge Building Solutions Inc

Technicly they're both do the samething which is to prevent water going back to the City water line. Back flow works like a boarder custom checks once you closed it, it will not alow any water to go through. If you compare it to the double check valve it alows some water to back in the system while you're closing the valve.

Waleed Dawood
par Waleed Dawood , Regional Market Manager , Rheem

A 'back flow preventer' is a general term for any part or valve used to prevent back flow of fluid .
It could be a siphon or air gap or a double check valve or any other specialized valve depending on application.
A double check valve is a dual spring valve which ensures double safety in case one spring gets jammed.It is often used to prevent backflow.

More Questions Like This