What are the fire prevention procedures that should be followed in the workplace?

Periodic inspection work sites makes us identify risks and recommend corrective steps necessary to prevent accidents or injuries as a result of the work of these risks.

- Legislation and occupational health and safety requires a labor inspection sites as a precautionary measure to ensure the health and safety of the workplace.

- What is required of supervisors to take action on their sites frequently inspect and detect any unsafe working conditions and work to take corrective steps.

- In some cases it is done to inspect the work sites by the safety committees.

- Inspection using preset examination forms is one of the best types of inspection as it helps to emphasize that there is not any of the items may have been overlooked in Altvic.ovi during the actual inspection must observe all the conditions and work procedures, if there is a threat that quickly threat was discovery must take appropriate preventive action in the case, not after the end of the inspection

The following points to prevent fire accidents: -

1. Periodic inspections of mechanical devices and equipment:

The periodic inspections of the devices is to discover defects that lead to maturity in the flammable materials are periodic inspection procedure (ranging from one to two years, according to operating conditions) where it is the arrest of the units and the opening of parts and replacement of the damaged ones so that they become operational units in good condition and reliable production properly and reduce accidents, which in turn lead to fire accidents.

2. The application of safety and prevention systems:

The monitoring and control of the operational activities and maintenance by the safety engineer is the only officer to prevent accidents, including fires if the maintenance work (hot) which is coupled to ignite the fire or the occurrence of a spark acts do not take place only after taking all safety precautions and to emphasize the lack of an accident may lead to Fire outbreak at the same time, the safety engineers are monitoring all business adherents and guide them to the correct ways that avoid them from accidents and maintenance laboratories to monitor everything that could lead to accidents. These activities carried out by the engineers of safety prevents or reduces the fire incidents to a minimum.

3. The training of technical things on fire-fighting:

All technicians trained in the use of handheld devices to extinguish fires for use in the event of a fire in the units so as to prevent its expansion and reduce the damage caused by puppies.

4. Fire team:

There amortization staff well-trained to fight oil fires and equipped with modern equipment to fight fires and fire trucks and a dry powder for the purpose of combating various types of fires are conducted daily and weekly exercises and lectures on an ongoing basis for the purpose of raising the efficiency of firefighters.

5. Fire reserve team:

Fire team is made up of technicians and duties do with the help of the original fire brigade in case of fires and the expansion of the reserve team training on the use of fire-fighting equipment well and conduct exercises to raise their efficiency.

6. devices and fire-fighting equipment:

The devices and fire-fighting equipment is one of the modern equipment and amortization Division

In safety and inspection department is the last

 Scientific findings in the field of firefighting and promote such devices, equipment and systems for automatic fire fighting.

- Fire phones:

There is in all places internal phones so that they can contact the Division Fire in

 Any region, the news about the fire.

- Control points:

There are monitoring and guarding in areas that are rare and there are people, such as reservoirs area points of the duties of the guards contact the Division firefighters in case of fire

 Or in the case of observation of things that are not normal for tanks or areas that previously monitored.

- Land system:

The all tethered devices reservoirs associated ground system so as to not go any spark stable may arise as a result of the flow of material or electrostatic discharge rods.

- Fire water system:

A water pipe system private firefighting distributed in all the places to be used in fire extinguishers.

Water basins:

There are pools of water that can be used for the purpose of fire.

- Special equipment:

Fire extinguishing equipment include the following:

1. Motor carrier material foam to fight fires reservoirs.

2. Motor carrier material dry powder to fight fires gases and liquids non-wide.

3. The composition of the foam equipment.

4. hoses.

5. Fire hand and scattered all over the place, such as operational units, laboratories and warehouses.

6. carbon automatic dioxide system, all such systems exist in the electric buttons and transformer room as well as some of the stores and small chemicals where there are industrial devices affected warmly materials used, leading to Fatah dioxide fallopian carbon mechanically to fill the raging fire and at the same time there are bells alert knocks at the earliest so that the area where the workers resides permanently.

7. Fixed foam towers:

There are fixed towers on the wall of petroleum products tanks to pump foam in case of fires.

8. animated foam towers:

And used in the case of fixed foam towers failure that crashed during a fire reservoirs.

9. separation categorically:

The knowledge of a wall of water spray to isolate the areas surrounding the fire area, particularly in the operational units and to prevent gas leakage to the surrounding areas.

10. hardware development:

The Division of Fire Safety and Inspection Department as mentioned monitors the latest findings of science in the field of fire fighting and apply it as much as possible from these developments. 

(1) Keep your work area free of waste paper, trash and other items that can easily catch fire, check on your electrical cords. If a cord is damaged in any way, replace it. Try not to lay cords in places where they can be stepped on, as this will contribute to deterioration of the protective outside coating.

(2) Don't overload your circuits, turn off electrical appliances at the end of each day. Keep heat producing equipment away from anything that might burn. This includes copiers, coffee makers, computers, etc.

actually this is major question , when we are taking about fire prevention that mean 

we need to implement very huge standard

like the life safety code

or NFPA 101 

so if i will answer i need more than 10 pages  to cover all the issues 

which are very important 

Thanks for the invite ..................: I agree with Mr. Dalal answers

No matter type of business you conduct at your workplace, fire safety should always be a main concern. Here are a few fire safety tips you can distribute to your staff

wait safety expert for more details