Register now or log in to join your professional community.
What can be seen on the screen are just vertical straight lines!
Did you mean a conversion to an external monitor or do you mean on the same machine؟
Hi, if the power light is glowing, and the display is black, the root causes might be the RAM or Hardware issue with the display or the harddrive itself, We need to diagonise futher by researting RAM and Harddrive. And many more work arounds.
The possibility that the video chipset has failed but normally, you would also see problems with the external display as well - for example, loss of ability to output at the monitor's native resolution (assuming that the monitor isn't capable of an output that exceeds the video chipset's capabilities), video corruption, strange colours on screen, etc...
If the device is equipped either a VGA or DVI Port, Better to connect it to a different screen, just to isolate the the problem of it's an LCD Problem or a Motherboard Issue
If after turning on a light indicator for ON display but no Displays on the screen.. It could be one of the following
- Bad of failing RAM
- Bad or Defective Display Chips on the Motherboard
- Bad Capacitors on the DC Power Circuit inside the Laptop
- Defective Flex Ribbon
if the monitor turns on,but it is not display anything on the screen means RAM problem.(RAM failed).
if you can turn ON the laptop,the light indications are run on the keyboard,but monitor didn't turn ON
means display problem.
it's a screen problem and you have to check it with an external display
On the same machine
RAM or Motherboard may be damaged
