Start networking and exchanging professional insights

Register now or log in to join your professional community.

Follow

Why and when to use this command? and what does "ping" refer to?, what does it mean ? c:\ping 127.0.0.1

ما الغرض من الأمر السابق عندما ننفذ ping للعنوان127.0.0.1 ؟ و ماذا تعني كلمة ping ؟ و متى نسخدم الأمر السابق ؟

user-image
Question added by هاشم المشارقة , Key Account Manager , Advanced United Systems Ltd. ( A member of Taj Holding Group)
Date Posted: 2013/10/03
Mostafa Abdo
by Mostafa Abdo , Senior Infrastructure and Security Architect , Devoteam

" PING " , simply means ' Packet Internet Groper '. This is a utility that actually lets you check the speed of Packet data sent and received on a network. When an IP address is pinged, the Network Adapter send out a specific number of packets and receives it back. A calculation of the receive time is made and this is usually in milliseconds. The higher this time is the longer it has taken the packets to be received. This is not good because it means that the Network has excess packet collisions and or noise and that it is quite slow.

and we use this command to test the local connectivity.

Fahad M Al Thobaiti
by Fahad M Al Thobaiti , Free Lancer consultant , Free Lancer

c:\ping127.0.0.1

Why and when to use this command ? and what does "ping" refer to ?, what does it mean ?

 

we normally use this command "c:\ping127.0.0.1" to check if the Network card is working ok or not.

"ping" is refers to the network latency between a client, and either the server or another client.

"ping" is used on computer networks to verify conectevity to other computers.

abdalrahman mohmmad
by abdalrahman mohmmad , IT Support Engineer , mixfm

اختبار كرت الشبكه 

Deleted user
by Deleted user

the command ping127.0.0.1

First, ping is a commun command used to test connectivity betwin devices on network

the address127.0.0.1 is the IPv4 loopback address, it is used by devices to direct traffic to themselves.

==>We ping the loopback address for the purpuse of testing the configuration of TCP/IP on the local host

Syed Asgar Mahmood Zaidi
by Syed Asgar Mahmood Zaidi , Senior System Engineer , Royal Hospital

Ping is used to check the connectivity  of network devices on the network it uses ICMP protocol  request by sending some bytes to the remote devices.

C:\>ping127.0.0.1 is uses to check that the TCP/IP protocol stack is installed or not on your computer.

full form of Ping us Packet Internet Network Groper

Deleted user
by Deleted user

ما الغرض من الأمر السابق عندما ننفذ ping للعنوان127.0.0.1 ؟ هى عمليه اختبار لكارت الشبكه بيسموها عمليه سوفت وير على عكس ان انت تعمل بنه وتأرجها بطريقه معينه عشان تعمل تيست يدوى للكارت 

 

و ماذا تعني كلمة ping ؟ اختصار لـ packet Internet Groper وهو أداة معروفة لأغلب مهندسي وخبراء تقنية المعلومات ويعتبر أمر من الأوامر المستخدمة في نظام الدوس وذلك لغرض الفحص والتحقق من الاتصال بمستوى IP مع كمبيوتر آخر أو موجه مسار Router أو طابعة أو أي جهاز آخر يستخدم برتوكول TCP/IP . حيث يرسل الأمر ping مجموعة من حزم البيانات إلى جهاز آخر مشترك في نفس الشبكة ويطلب منه الرد بإشارات معينة على هذه الحزم ثم يعرض النتائج بأكملها على الشاشة. الشكل العام للأمر ping :   

 

 

و متى نسخدم الأمر السابق ؟

 

    غرض الفحص والتحقق من الاتصال لأى IP

Bakr Ababneh
by Bakr Ababneh , It technical support , Ministry of education and higher education

 we use this command " ping127.0.0.1"  to know if this PC working on the network ( check if network adapter working or not) it means send a messege to the local host if its reply it means this adapter working good but if it is not reply that means it is not working good.

PING refet to : Packet Internet or Inter-network Groper   

we use this command when the ping on other clients or prepherals are not replying

 

 

Deleted user
by Deleted user

It is use to check whetehr the nic(network interface card ) of ur device is wokrking or not. In other words we can say tht wheteher the tcp/ip stack is working or not.ping refer to a command use to check whetehr the communication between the two device is established or not

Khandakar Ashfaqur Rahman
by Khandakar Ashfaqur Rahman , Head Of Network , Smart Network Ltd

This is a localhost address.

 

Simply you can use "ping127.0.0.1"  to test you NIC (Network Interface Card).

 

Every host should respond127.0.0.1 if the NIC is ok because every computer contains this record under /etc/localhost file.

Amr Saleh
by Amr Saleh , Senior I&C technical office engineer , ENPPI

make sure that your network lan card working and all ips are good to go

ping is used to send echos of data for another ip to make sure there is connectivty

to troubleshoot the connection if there is a problem

mohamed mostafa
by mohamed mostafa , Network and Security operation manager , Raya Data Center

A-Ping  a computer network tool used to test whether a particular host is reachable across an IP network

B- when you test the loopback you are testing the TCP/IP protocol.

More Questions Like This