Communiquez avec les autres et partagez vos connaissances professionnelles

Inscrivez-vous ou connectez-vous pour rejoindre votre communauté professionnelle.

Suivre

The primary winding of a power transformer should always be

user-image
Question ajoutée par Utilisateur supprimé
Date de publication: 2013/05/23
محمد سامي الششتاوي الشرقاوي
par محمد سامي الششتاوي الشرقاوي , نائب مدير محطة , The Holding Company for Drinking Water and Sanitation in Dakahlia.

fused and input side and monitorized

Muhammad Tayyab Sarfraz
par Muhammad Tayyab Sarfraz , Assistant Manager Power House , US Apperal & Textile Pvt. Ltd. at Head Office: US-1, 26-M Gulberg III, Lahore.

The primary winding of a power transformer should always be "DELTA" connection.

iram shahzad Khan
par iram shahzad Khan , Senior Estimation, Tender Engineer , Bin Omerah Company

the depnad upon the type of Transformer.
Distrinution Transformer connection .The primary winding of a power transformer should always be Delta Connection.
Delta Connection used for Three Phase Star Connection Used for Three Phase + Netural Line.

Utilisateur supprimé
par Utilisateur supprimé

Fused..
When the secondary loaded is over loaded, it means draws max.
Current in the primary side due to which damaged the primary side as wellas appliances.
So that power t/f is fused the circuit.

munther khatib
par munther khatib , Senior project manager , Alfanar Construction Company

That is not enough inputs to reply.
However,

Leonardo Banzali
par Leonardo Banzali , Electrical Maintenance-trainer , Sadara Chemical Company

the incoming side.

tamer mahmoud mohamed mohamed abd elgawad
par tamer mahmoud mohamed mohamed abd elgawad , Senior MEP Project Manager , Voltas Limited - United Arab Emirates

Delta connected

Irfan shah
par Irfan shah , electromechanical engineer , kamran auto dubai

fused and input side and monitorized

LAMIDI OWUDA
par LAMIDI OWUDA , ENGINEER/SUPERVISOR , DSCLTD WARRI, NLNG BONNY ISLAND, UNIPORT, PORTHARCOURT,NIGERIA

The primary winding of a power transformer should always be the first coil in which the electric energy is fed from the a.c.
supply mains, and is called the PRIMARY windings and the other from which energy is drawn out is called SECONDARY winding.
A transformer is a device that,1.
transfer electric power from one circuit to another,2.
it does so without a change of frequency3.
it accomplishes this by electromagnetic induction and4.
where the two electric circuits are in mutual inductive influence of each other.5.
if N2 > N1 ie.
k >1 then transformer is called step up transformer6.
if N2 < N1 ie.
k <1 then transformer is called step down transformer.7.
ideal transformer input VA = output VA.
V1 I1 =V2 I2 N1= number of turn primary and V1 = Voltages in primary N2= number of turn secondary and V2 = Voltages in secondary.

Mawloud Kalimat
par Mawloud Kalimat , General Manager , H. Doctors Pharmaceuticals Industries Company

The primary winding of a power transformer should always be Fused :)

More Questions Like This